Cleco Page Title

1

Cleco Screwdrivers

A tradition of quality is built into every screwdriver.

Cleco screwdrivers have long been recognized as the assembly tool standard against which all other brands are measured. With over 100 years of precision manufacturing experience built into each tool, Cleco screwdrivers provide users the ultimate in light and medium duty assembly tool performance.

Cleco's long standing tradition of service to the customer has led us to develop an extensive line of screwdrivers with configurations to suit a broad range of applications. Options including multiple reversing methods, different clutch styles, numerous handle alternatives, and a wide variety of accessories provide the building blocks for tool configurations designed to meet our customers' unique assembly application requirements.

The Cleco 2 series of inline Clecomatic screwdrivers offer dependable repetitive torque accuracy from .5 to 8 in.-lbs., ideal for miniature assemblies often found in extra light-duty electronics assembly using #0 to #5 screws.

In the light to medium duty assembly tool market, the ergonomically designed Cleco 14 series screwdrivers, with a torque range of 1.7 to 130 in.-lbs., are the ultimate tools for an infinite range of applications including computer, electronics, and appliance assembly.

With a torque range of 15 to 180 in.-lbs (1.7 to 20Nm), the 8 & 88 series Cleco screwdrivers cover the gamut of medium duty assembly applications ranging from lawn and garden equipment to small recreational vehicles, and even automotive.

Capable of running down fasteners as large as 5/16 (M6), the Cleco 35 series screwdrivers are the true workhorses of the medium to heavy-duty screw assembly market.

Clutch Selection Guide

Choose the right tool to match your application.

Clecomatic® Clutch

Clecomatic Clutch

When tightening a fastener, torque is transmitted through the Clecomatic clutch to the fastener until the clutch can no longer transmit the increasing torque. The clutch then "slips", which allows an internal mechanism to seal off air to the air motor, shutting off the tool at the user-adjusted preset torque level. This type of torque control allows maximum RPM from the tool for increased productivity. Since the tool doesn't dwell on the fastener as with a stall tool, tool wear and fatigue to the operator is reduced. The life of a Clecomatic tool is up to five times longer than that of a lever-operated, ratcheting clutch screwdriver.

Stall Type

Stall Type

The stall tool doesn't use a clutch but rather the output spindle is coupled to the last stage of gearing. Torque output from a stall tool may be controlled within fairly reasonable limits with an air pressure regulator. Stall type tools are also trigger activated.

Cleco Inline Screwdrivers

Inline Screwdrivers

2, 1 4, 8, 88, 35 Series Clecomatic Clutch

2 Series

Torque Range: .06 - .9 Nm 0.5 - 8 In. Lbs.

  • Push-to-start
  • Push button reverse
  • External torque adjustment
  • 1 /4" quick change chuck

14 Series

Torque Range: .5 - 5.1 Nm 4 - 45 In. Lbs.

  • Push-to-start and Push & Lever start
  • External torque adjustment
  • Bit & Finder & 1 /4" quick change chuck

8 Series

Torque Range: 1.7 - 8.5 Nm 15.0 - 75 In. Lbs.

  • Push button reverse and non-reversible
  • Push-to-start and Push & Lever start
  • Bit & Finder and Quick change

88 Series

    Torque Range: 1.7 - 19 Nm 15 - 170 In. Lbs.

  • Push button reverse and non-reversible
  • Push-to-start and Push & Lever start
  • Quick change & 3/8" square drive

35 Series

Torque Range: 1.7 - 20 Nm 15 - 180 In. Lbs.

  • Quick change and square drive
  • Short stroke button reverse
  • External torque adjustmen
Inline Screwdrivers
Cleco Pistol Grip Stall Screwdrivers

14 & 8 Series Stall

14 & 8 Series Stall

Torque Range: 2.1 – 12.4 Nm 19 – 110 In. Lbs.

  • Pistol
  • 1 /4" hex quick change drive
  • Trigger start
  • Convenient top, bottom and rear air inlet (14 Series T-handle models)
  • "P" and "T" style handles (14 series)
  • Sliding knob reverse (8 & 1 4 series)
  • Push button reverse (8 series)
Pistol Grip - Stall
Cleco Pistol Grip Clecomatic Screwdrivers

14 Series Clecomatic Clutch

14 Series

Torque Range: .2 – 14.7 Nm 2.0 – 130 In. Lbs.

  • Sliding knob reverse
  • External torque adjustment
  • Quick change drive
  • Convenient top, bottom and rear air inlet (T-handle models)
  • Torque signal ports provided
  • Trigger and Push & Trigger start

The "T" handle is best for applications that are pre-threaded and the grip on the tool is required to simply guide the tool as the fastener is being tightened.

T Handle

The "P" handle is best suited for thread cutting fasteners where force must be exerted against the ergonomically shaped "P" handle during the process.

P Handle

8, 88 & 35 Series Clecomatic Clutch

8 Series

Torque Range: 1.7 – 85 Nm 15 – 75 In. Lbs.

  • Bit and finder and quick change
  • Reversible
  • Trigger, Push-to-Start and

Push & Trigger start 88 Series

Torque Range: 1.7 – 20 Nm 15 – 180 In. Lbs.

  • Quick change and square drive
  • Reversible
  • Trigger and Push & Trigger start

35 Series

Torque Range: 1.7 – 20 Nm 15 – 180 In. Lbs.

  • Pistol grip
  • Quick change and square drive
  • Reversible
  • Trigger, Push-to-Start and Push & Trigger start
Pistol Grip - Clecomatic Clutch

Home  |  About  |  Products  |  Catalog  |  Contact  |  Request a Quote  |  Email